Trace a roof yourself in the free full-screen tracer when you want hands-on control over the measurement.
Sometimes you want your own hands on the measurement — to double-check a number, to work a roof you know well, or because you would rather trace it than trust a pipeline. The DIY roof tracer is built for exactly that: a free, full-screen tracing workspace on the MEASUREMENTS tab.
§Open the tracer
- 01Open the customer and go to the
MEASUREMENTStab. - 02Tap
TRACE— the tracer opens full-screen so the roof gets your whole display. - 03Trace the roof, then save your work.
Like the automatic pipeline, tracing is free — there is no per-trace charge, so use it as often as it earns its keep.
§When to trace instead of running automatic
- ◆You want to verify or sanity-check an automatic result with your own eyes.
- ◆You know the roof and want direct control over what gets measured.
- ◆You prefer producing the measurement yourself before putting a number in front of a customer.
The two approaches are not either/or. Running + NEW MEASUREMENT and tracing the same roof costs nothing extra, and agreement between the two is a strong signal the numbers are right.
§Where your traced measurement lives
A saved trace becomes a row in the same measurement hub as every other measurement on the customer, and opens into a measurement report detail like the rest. The hub updates in real time, so your result is immediately visible to the whole team.